Old message, but here's the response. The values you are seeing are the new values as of the newest datasheets. Earlier versions of the datasheet specified different recommended values. The radio stacks in both Boomerang and TinyOS 2.x have been updated to reflect the new datasheets, but the 1.x stack has not been.
-Joe On 9/6/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > Hello, > > In CC2420ControlM.nc, the TXCTRL register's TX mixer buffer bias current (bits > 14 and 15) is set to '1'. In the CC2420 data sheet, this value is listed as > being '2' by default. In CC2420ControlM.nc, all other values in this register > are set to the default as listed by this data sheet, except for that value. > Why is the value being set to 1 instead of 2 by TinyOS? > > Thanks, > John M. > > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > _______________________________________________ Tinyos-help mailing list [email protected] https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
