The mib520 appears as two ttyUSB ports, the lower numbered one is for
programming and the higher numbered one is for UART communication. If
you try connecting the serial forwarder to, in your case, /dev/ttyUSB1
it should work.

-August

On 5/12/06, Kan Cai <[EMAIL PROTECTED]> wrote:

Hi, all:

   I had a MIB510 serial board and everything was set up nicely on Ubuntu.
Recently, I got a MIB520 USB programming board and failed to make it work.

   I can use /dev/ttyUSB0 to program the motes correctly. However, it seems
that my motes are not able to upload information to the computer via the
USB cable. I am providing the MicaHWVerify testing result as follows. Any
help would be appreciated!

   I am using TinyOS 1.15 and mica2 motes. Thanks in advance!

cheers,
--ken

--------------------------------------------------------------------------

#echo $MOTECOM
[EMAIL PROTECTED]:57600

# ls -lt /dev/ttyUSB0
crwxrwxrwx  1 root dialout 188, 0 2006-05-12 22:14 /dev/ttyUSB0

# ls -lt /dev/ttyS6
lrwxrwxrwx  1 root root 12 2006-05-11 23:59 /dev/ttyS6 -> /dev/ttyUSB0

# ls -lt /dev/COM7
lrwxrwxrwx  1 root root 10 2006-05-12 08:30 /dev/COM7 -> /dev/ttyS6

# make mica2 install
     compiling MicaHWVerify to a mica2 binary
ncc -o build/mica2/main.exe -Os -board=micasb -target=mica2  -Wall
-Wshadow -DDEF_TOS_AM_GROUP=0x7d -Wnesc-all -finline-limit=100000
-fnesc-cfile=build/mica2/app.c  MicaHWVerify.nc -lm
     compiled MicaHWVerify to build/mica2/main.exe
            11738 bytes in ROM
              450 bytes in RAM
avr-objcopy --output-target=srec build/mica2/main.exe
build/mica2/main.srec
make[1]: Entering directory `/opt/tinyos-1.x/apps/MicaHWVerify'
     installing mica2 binary
uisp -dprog=mib510 -dserial=/dev/ttyUSB0 -dpart=ATmega128 --wr_fuse_e=ff
--erase --upload  if=build/mica2/main.srec
Firmware Version: 1.8
Atmel AVR ATmega128 is found.
Uploading: flash

Fuse Extended Byte set to 0xff
make[1]: Leaving directory `/opt/tinyos-1.x/apps/MicaHWVerify'

# java hardware_check

Hardware check started
[EMAIL PROTECTED]:57600: resynchronising
Node transmission failure


_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help


_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help

Reply via email to