Re: [Tinyos-help] Run Multiple Serial Forwarders??

Aditya Bhave Fri, 26 May 2006 00:24:50 -0700

If Im not mistaken, SerialForward acts like a server and forwards serial port data or (in your case ethernet data to a TCP port) So what is the point of using multiple Serial Forwards when you have only one MIB600 board connected to the PC? Basically different packet types (from sensors in diff buildings) will come over the ethernet wire into your PC. The Serial Forwarder will put all those packets onto some TCP port (10002) and you need to write another application (like Oscilloscope) that reads from this port and takes actions depending on the packet types.

Please correct me if Ive missed some obvious point here

On 5/26/06, [EMAIL PROTECTED] < [EMAIL PROTECTED]> wrote:

Hey all,
  I would like to run multiple Serial Forwarders, using the MIB600, So that i
can have multiple sensing networks in different buildings, and capture data on a
single PC.
   A) Do i open multiple serial Forwarders on the same 10002 port??
   B) HOw do I start multiple instances of Listen to dump data from its
respective serial forwarder?  IE: how can I specify Listen to listen to one
forwarder, and the other instance of Listen to listen to another forwarder?

Thanks in advance for your help!!

Josh

-------------------------------------------------
This mail sent through IMP: http://horde.org/imp/
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help

--
regards,
Aditya Bhave

_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help

Re: [Tinyos-help] Run Multiple Serial Forwarders??

Reply via email to