Attached is a snippet from my schematic that shows a programming and I/F cable that goes between a MIB510 and a re-Mote. I have used this cable to program mica2's without having to plug the 52pin conn into the MIB. My belief is that all you need is SPck, URX0, UTX0, and RSTN (18, 27, 28, 48) and GND. I don't think MISO and MOSI are used for programming, but I will only swear that the cable in the jpg works...
MS Andres Aberasturi wrote:
Hi all,We are going to work with a micaz oem. Then we need connect micaz to MIB510. What pins we have to connect?We think we need to connect Vcc (50), GND (51), UART_RXD0 (27), UART_TXD0 (28), PROG_MOSI (16), PROG_MISO (17), where in brackets it is the pin number of the hirose connector. is that right?We will be grateful for any clue. Thanks in advance, Andres _________________________________________________________________Horóscopo, tarot, numerología... Escucha lo que te dicen los astros. http://astrocentro.msn.es/_______________________________________________ Tinyos-help mailing list [email protected] https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
<<attachment: S_untitled.jpg>>
_______________________________________________ Tinyos-help mailing list [email protected] https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
