When using a mib510
with a mica2 connected and looking at the incoming raw packet,
it appears the msb of some bytes are high when they should be
low. For example, some frame synchronization bytes will be hex
FE instead of 7E or bytes that should be 00 are 80.
Have tried different mib510 boards, serial cables, computers, and
mica2s. Of eight mica2's tried, only two work correctly, i.e. no bad
bytes. I am able to program all mica2's, using mib510, with no
problems.
Has anybody
experienced this problem? Seems odd that a couple of the mica2's work O.K.
when connected to the mib510's while all others do not.
_______________________________________________ Tinyos-help mailing list [email protected] https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
