Ryan,
The offending error is actually "stdout: Bad file descriptor". It's a
problem between nesC, Windows 2000, and Cygwin. If you compile and
(re)install nesC on that machine, the error should go away. We have
had similar problems in our Boomerang distribution previously, and as
a work around, you can pipe the make command through cat, like "make
telosb | cat", the compile should succeed.
As reference, you can see our Boomerang notes on this issue in the
section "Compile fails in Windows 2000 Professional" here
http://www.moteiv.com/community/Moteiv_Boomerang_Fixes
Cory
On 8/15/06, Ryan Aures <[EMAIL PROTECTED]> wrote:
We are working with TinyOS 2.0 on a Windows 2000 machine. Whenever we try
to change and compile one of the sample apps, we get the same type of
errors. An example of the errors is below. In this case we added the
following line to RadioCounttoLedsC.nc in an event:
if(counter == 2000)
call MilliTimer.stop();
This shouldnt cause a problem but we were unable to compile for telosb. We
also have tried modifying the header file for this program and the same
error occurs. Is it possible our TinyOS environment is not set up
correctly? Any help would be appreciated.
Thanks,
Ryan
This is the error when compiling RadioCounttoLeds:
[EMAIL PROTECTED] /opt/tinyos-2.x/apps/radiocounttoleds
$ make telosb install
mkdir -p build/telosb
compiling RadioCountToLedsAppC to a telosb binary
ncc -o build/telosb/main.exe -Os -O -mdisable-hwmul -Wall -Wshadow
-DDEF_TOS_AM_GROUP=0x7d -Wnesc-all -target=telosb -fn
esc-cfile=build/telosb/app.c -board= RadioCountToLedsAppC.nc -lm
stdout: Bad file descriptor
In file included from
/opt/tinyos-2.x/tos/chips/msp430/usart/Msp430UsartShare0P.nc:51,
from /opt/tinyos-
2.x/tos/chips/msp430/usart/Msp430Usart0C.nc:54,
from
/opt/tinyos-2.x/tos/chips/msp430/usart/Msp430Spi0C.nc:63,
from
/opt/tinyos-2.x/tos/platforms/telosa/chips/cc2420/HplCC2420SpiC.nc:50,
from
/opt/tinyos-2.x/tos/chips/cc2420/CC2420SpiP.nc:56,
from
/opt/tinyos-2.x/tos/chips/cc2420/CC2420SpiC.nc:81,
from
/opt/tinyos-2.x/tos/chips/cc2420/CC2420ControlC.nc:73,
from
/opt/tinyos-2.x/tos/chips/cc2420/CC2420CsmaC.nc:61,
from
/opt/tinyos-2.x/tos/chips/cc2420/CC2420ActiveMessageC.nc:53,
from
/opt/tinyos-2.x/tos/platforms/telosa/ActiveMessageC.nc:61,
from /opt/tinyos-2.x/tos/system/AMQueueP.nc:43,
from /opt/tinyos-2.x/tos/system/AMSenderC.nc:50,
from RadioCountToLedsAppC.nc:45:
In component `FcfsArbiterC':
/opt/tinyos-2.x/tos/system/FcfsArbiterC.nc:84: failed to preprocess
/opt/tinyos-2.x/tos/interfaces/ResourceController.nc
make: *** [exe0] Error 1
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
