Sounds like you have a Synchronous serial device, so it won't do
to attach it to the standard U(Async)RT. I don't know about the
telos devices, but most micro-controllers have options for sync,
e.g., USART1 on the mica's, which is used for I2C, flash, and radio.
Dig through the controller manual for more info.
MS
rgunasek wrote:
Hi,
I am working on interfacing an external ADC to the Telosb, the ADC( using
ADS1211 from TI) has a serial data input, serial data output and a serial
clock input.
Thought about interfacing to the UART pins on the 10 pin external connector.
Is interfacing the ADC to the external UART going to work, and how about clock
synchronization if using the UART.
I would be appreciate suggestions on how to proceed, if any examples please
help me find it.
Regards
Raghul
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
