Hi,
The actual problem is that the TOSBase is not working for the MicaHWVerify (RF
Verification) or OscilloscopeRF applications.
I tried TOSBase with MicaHWVerify and OscilloscopeRF. It just give those
warning when it is compiling. I know those warnings may not be the problem.
1) As the tutorial says that the TOSBase is for MICA2 and MICA2DOT. It specify
MICA2 as the PLATFORM in its' make file. So what i did is , i changed it into
MICAZ. Because we have only MICAZ Motes.
2) I tried this with "SimpleCmd" application as well - but it dosen't work for
that as well.
* Are their any aditional changes which i should make in order to change an
application (e.g TOSBase) to support for MICAZ platform?
As i understand, i thought i just want to change the platform in
its Makefile, because of the baurdrate of MICA2 and MICAZ are the same. Is it
correct?
* The "MicaHWVerify" work for MICAZ when i just change the PLATFORM to MICAZ-
Only for the Hardware Verification. (Not for the RF Verification). Why is that?
Please help me to resolve these problems. Because i can't go forward without
TOSBase for implementing Radio Communication with the PC.
OR Else
** IS THERE ANY OTHER PROGRAM WHICH I COULD USE INSTEAD OF "TOSBase" OTHER THAN
"GENERICBase"??.
(I CAN'T USE TransparentBase, because i want to get the data by considering
GroupID as well.)
Regards,
Bandara.
(The Happy is the Goal!).
----- Original Message ----
From: Michael Schippling <[EMAIL PROTECTED]>
To: Thusitha Bandara <[EMAIL PROTECTED]>
Cc: [email protected]
Sent: Monday, December 11, 2006 12:14:29 PM
Subject: Re: [Tinyos-help] My TOSBase application is still not working for
MICAZ , Please Guide Me
ummmmm...what is the actual problem?
The warnings?
Most likely they are red herrings...just go ahead and install the program.
MS
Thusitha Bandara wrote:
>
> * Hi, *
> * *
> * I couldn't find the problem with my TOSBase Application. If you can,
> please help me to make the TOSBase application work for MICAZ. All the
> datails are as below: *
>
> *First Compilation Output of TOSBase:*
>
> [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
> /cygdrive/d/tinyos/cygwin/opt/tinyos-1.x/contrib/xbow/apps/T
> OSBase
> $ make micaz
> mkdir -p build/micaz
> compiling TOSBase to a micaz binary
> ncc -o build/micaz/main.exe
> -Os -I%T/../contrib/xbow/tos/platform/micaz
> -finline-limit=100000 -Wall -Wshadow -DDEF_TOS_AM_GROUP=125
> -Wnesc-all -target=micaz
> -fnesc-cfile=build/micaz/app.c
> -board=micasb -DCC1K_DEFAULT_FREQ=RADIO_916BAND_CHA
> NNEL_00
> -DRADIO_XMIT_POWER=0xFF
> -DCC2420_TXPOWER=TXPOWER_MAX
> -DCC2420_DEF_CHANNEL=26
> -DIDENT_PROGRAM_NAME="TOSBase"
> -DIDENT_PROGRAM_NAME_BYTES="84,79,83,66,97,115,101,0"
> -DIDENT_USER_HASH=0x7d03cf31L
> -DIDENT_UNIX_TIME=0x45769692L
> -I/opt/tinyos-1.x/tos/lib/CC2420Radio TOSBase.nc -lm
>
> D:/tinyos/cygwin/opt/tinyos-1.x/tos/platform/micaz/HPLCC2420InterruptM.nc:161:
>
>
> warning: `CCATimer.start' called asynchronously from `CCA.startWait'
> D:/tinyos/cygwin/opt/tinyos-1.x/tos/lib/CC2420Radio/CC2420RadioM.nc:115:
> warning: `Send.sendDone' called asynchronously from `sendFailed'
> compiled TOSBase to build/micaz/main.exe
> 9986 bytes in ROM
> 601 bytes in RAM
> avr-objcopy --output-target=srec build/micaz/main.exe build/micaz/main.srec
> avr-objcopy --output-target=ihex build/micaz/main.exe build/micaz/main.ihex
>
____________________________________________________________________________________
Any questions? Get answers on any topic at www.Answers.yahoo.com. Try it now._______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
