Hi,
I use pc with windows XP installed, and CygWin!
On 18/01/07, colombo <[EMAIL PROTECTED]> wrote:
Hi, Pablo
I tried several times but don´t work in my mica2dot. I have formated the
Flash with FormatFlash.nc, then install the Delugebasic app with idnode=9.
I use the Deluge java app with serial Forwarder. I can ping the node and see
the images.
I have a big question to do. When I format the flash, all the image that I
have their dissapear?
In my case they don't dissapear, after I execute the formatFlash program,
the images stay there!!
Is this the problem I have??
Thanks
Arnaldo Monteiro
On 17/01/07, Jacob Sorber <[EMAIL PROTECTED]> wrote:
>
> I had this same problem, and it turned out that in the TOSBoot
> implementation for the mica2dot plaform, the GPIO pins were not being
> initialized. My memory is a little fuzzy about exactly what needs to be
> modified---it was months ago and I have not looked at Deluge since---but I
> believe it was "tos/lib/Deluge/TOSBoot/at45db/ExtFlashC.nc". I added the
> following lines to the StdControl.init(), and I think that was all I
> changed. It is possible that I forgot something, so you should verify that
> this works. Also, don't forget that you need to recompile TOSBoot.
> Rebuilding your application is not sufficient. Also, I was under the
> impression that Jonathan Hui had submitted this fix to the CVS tree. So, it
> might be fixed in a later version.
>
> Hope that helps,
> Jacob Sorber
>
> //Add this to ExtFlashC.nc
> command result_t StdControl.init()
> {
> TOSH_MAKE_FLASH_CS_OUTPUT();
> TOSH_SET_FLASH_CS_PIN();
> TOSH_MAKE_FLASH_CLK_OUTPUT();
> TOSH_CLR_FLASH_CLK_PIN();
> TOSH_MAKE_FLASH_OUT_OUTPUT();
> TOSH_SET_FLASH_OUT_PIN();
> TOSH_MAKE_FLASH_IN_INPUT();
> TOSH_CLR_FLASH_IN_PIN();
> return SUCCESS;
> }
>
>
>
> On 1/16/07, Pablo Gil Montaño <[EMAIL PROTECTED] > wrote:
> >
> > Hi,
> >
> > Have you tried Deluge included in revision 1.1.14? The thing you
> > explain about not changing the program in execution after rebooting is
> > exactly what happened to me when I was using Deluge included in tinyos
> > revision 1.1.15. You just have to substitute tos/lib/Deluge and all
> > its subfolders with the ones iin revision 1-1-14 in tinyos CVS repository
> > available at sourceforge.net.
> >
> > With respect to the SerialForwarder problems. Does it happen only with
> > Deluge java api? You could try using another application that also sends
> > messages to the nodes. You can try with Drip, which injects packets
> > epidemically on the network (tos/lib/Drip/README for more info).
> >
> >
> > Regards,
> >
> > Pablo Gil
> >
> >
> >
> > ----- Mensaje original ----
> > De: colombo < [EMAIL PROTECTED]>
> > Para: Pablo Gil Montaño <[EMAIL PROTECTED]>
> > Enviado: lunes, 15 de enero, 2007 22:05:26
> > Asunto: Re: [Tinyos-help] Deluge 2 and mica2DOT
> >
> > Hi ,
> >
> > Thanks for your explanation. I can´t put tinyos1.1.15 work with only
> > the mica2. With the mica2dot i cannot change the image. i can inject in both
> > cases (mica2 and mica2dot) but when I try to reboot to another image, in
> > mica2dot don´t change. It remains on the same.
> > Another problem is: I have one mica2 that is a a gateway runing
> > TOSbase and another mica2 in the network. When I use the Deluge java api to
> > inject a image into the mica2 on the network, i get to many errors in the
> > serial forwarder and thakes to long to Load the image into it.
> >
> > Thanks
> >
> > Arnaldo Monteiro
> >
> > On 15/01/07, Pablo Gil Montaño < [EMAIL PROTECTED]> wrote:
> > >
> > > Hi all,
> > >
> > > I've been trying to make Deluge 2.0 work on mica2 (under tinyos-1.x).
> > > Finally I got it working, I'll post here how I did it just in case it is
of
> > > any use to someone.
> > >
> > > The first reason why it didn't work was that I was using a version
> > > of some tools (avr-gcc, avr-libc, etc.) different from the ones provided
in
> > > tinyos webpage [1]. These versions are the ones in the Ubuntu
repositories,
> > > and are higher versions. The problem was that image files generated by
> > > avr-gcc version in ubuntu repositories turned out to be considerably
bigger
> > > than the one generate by the older version. Deluge java toolchain
considered
> > > it too big (too many pages) and wouldn't transfer it to the mote.
> > >
> > > Secondly, Deluge in CVS revision 1.1.15 doesn't seem to work well
> > > with mica2 motes. This problem has already been described in previous
mails
> > > in this list (e.g.: message from Simon Willis on Wed, 27 Dec 2006,
> > > titled 'Bugs found in Deluge/TOSBoot'). I just subsituted the entire
> > > tinyos-1.x/tos/lib/Deluge folder with revision 1.1.14 in the
> > > repositories and now it works.
> > >
> > > Regards,
> > >
> > > Pablo Gil
> > >
> > >
> > >
> > > ----- Mensaje original ----
> > > De: Pablo Gil Montaño <[EMAIL PROTECTED]>
> > > Para: colombo < [EMAIL PROTECTED]>;
> > > [email protected]
> > > Enviado: lunes, 15 de enero, 2007 17:34:03
> > > Asunto: Re: [Tinyos-help] Deluge 2 and mica2DOT
> > >
> > > Hi all,
> > >
> > > I'm trying just to make deluge 2.0 work on mica2 motes under
> > > tinyos-1.x.
> > >
> > > I have formatted the flash and uploaded DelugeBasic application. The
> > > node responds to ping messages sent through Deluge java toolchain, but
when
> > > I try to inject an image, I always get the following error:
> > >
> > > Error: tos image is too large
> > >
> > > This happens with any image (I mean, if I just program them directly
> > > without Deluge, they work), and regardless which image number I try to use
> > > (I get image number 0,1 and 2 when pinging the node).
> > >
> > >
> > > Regards,
> > >
> > > Pablo Gil
> > >
> > >
> > >
> > > ----- Mensaje original ----
> > > De: colombo <[EMAIL PROTECTED]>
> > > Para: [email protected]
> > > Enviado: viernes, 12 de enero, 2007 22:02:10
> > > Asunto: [Tinyos-help] Deluge 2 and mica2DOT
> > >
> > > Hi,
> > >
> > > I have the same problem. Does you resolved yet ?
> > >
> > > Thanks
> > >
> > >
> > >
> > > Arnaldo Monteiro
> > >
> > > Hi
> > >
> > > I have a strange problem.
> > >
> > > Deluge 2 works perfectly with my mica2 motes.
> > > But with the mica2DOT motes I'm encountering some problem.
> > >
> > > I can install the tos_image.xml files (of course compiled for mica2DOT)
> > >
> > >
> > >
> > > into the motes with the deluge inject command.
> > > Also the deluge ping command works and shows correct results, but
> > > somehow the deluge reboot command has no effects, the corresponding
> > >
> > > image is not executed.
> > >
> > >
> > >
> > > If i put the program directly with the make install command on the motes
> > > it works.
> > >
> > > Has anybody had the same problem or any idea what could be wrong ?
> > >
> > > Thanks a lot
> > >
> > > Hannes
> > >
> > > _______________________________________________
> > > Tinyos-help mailing list
> > > [email protected]
> > > https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
> > >
> > >
> > >
> > > ------------------------------
> > >
> > > LLama Gratis a cualquier PC del Mundo.
> > > Llamadas a fijos y móviles desde 1 céntimo por minuto.
> > >
http://es.voice.yahoo.com<http://us.rd.yahoo.com/mail/es/tagline/messenger/*http://es.voice.yahoo.com/>
> > >
> > >
> > > ------------------------------
> > >
> > > LLama Gratis a cualquier PC del Mundo.
> > > Llamadas a fijos y móviles desde 1 céntimo por minuto.
> > >
http://es.voice.yahoo.com<http://us.rd.yahoo.com/mail/es/tagline/messenger/*http://es.voice.yahoo.com/>
> > >
> >
> >
> >
> > ------------------------------
> >
> > LLama Gratis a cualquier PC del Mundo.
> > Llamadas a fijos y móviles desde 1 céntimo por minuto.
> >
http://es.voice.yahoo.com<http://us.rd.yahoo.com/mail/es/tagline/messenger/*http://es.voice.yahoo.com/>
> >
> > _______________________________________________
> > Tinyos-help mailing list
> > [email protected]
> > https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
> >
> >
> >
>
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
