Hi,
Platform: MicaZ
OS: TinyOS 1.15 (I think, definitely not 2.0)
Application: Adapted from OscilloscopeRF
I've noticed that during readings of the ADC, radio activity (reception or
transmission) can cause the data to change dramatically (probably due to the
drain on the power supply for the ADC reference voltage). I've tried calling
ComControl.stop() and CommControl.start() either side of taking data, but the
radio doesn't seem to start back up again.
Is there a way to suspend the radio during a measurement to prevent the data
being affected. I know that I could just set a lower sample rate and then have
careful timing to stop them overlapping, but I would like to find a more
rigorous way of solving the problem.
Thanks, Mike
******************************************
Wireless Communications
Enabling Metrology Division
National Physical Laboratory
Hampton road
Teddington
United Kingdom
TW11 0LW
0208 943 6771
www.npl.co.uk
******************************************
-------------------------------------------------------------------
This e-mail and any attachments may contain confidential and/or
privileged material; it is for the intended addressee(s) only.
If you are not a named addressee, you must not use, retain or
disclose such information.
NPL Management Ltd cannot guarantee that the e-mail or any
attachments are free from viruses.
NPL Management Ltd. Registered in England and Wales. No: 2937881
Registered Office: Serco House, 16 Bartley Wood Business Park,
Hook, Hampshire, United Kingdom RG27 9UY
-------------------------------------------------------------------
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
