Hi
Program the mote with the firmware application MTS300_CB (that comes
with MoteView 1.4 or Moteworks). It must be the version CB to measure
light and temperature at the same time.
Regards
Milton Aguiar
Nuru Yakub Othman escreveu:
Hi,
We have received the xbow classroom kit and are making some trials. We
are facing a problem in sensing temperature as it appears to be giving
a constant value .. never changes even when we put the sensor close to
a heater with high temp.
We have tried with the XSensor application, and use xlisten to read
the output. The light and sound values are OK, but the temperature
stays at -273.15 Celcius, absolute zero.
We also modified OscilloscopeRF to sense temperature, the raw value on
the graph stays constant at -7.
It looks like the sensor is not really sensing. We tried with several
MTS300CB sensor modules with same results.
Can someone help as to what we might be missing? Is there a switch or
anything that should be enabled?
I don't think the problem is with the code, but I can send the code if
required.
Thank you in advance.
//Nuru.
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
