Dear folks:
 
   I am trying the simplest "Blink" code on my MICAz mote. I am so close to 
success, but I got a problem. Here is what's happening:
 
 1) I mount micaz firmly to the mib510 without batteries on micaz. mib510 
turned is OFF, micaz is turned OFF. I connect the mib510 to wall power. I can 
see the mib510 GREEN led is on.
 
 2)MIB510 is connected to PC with a radioshack USB-serial cable. Driver is 
installed. I can see the COM3 is allocated to it in Window's Device Manager.
 
 3)In Blink directory, I use the following instruction:
 make clean
 make micaz install,0 mib510,com3
 
 TinyOS compiles successfully at first, but cygwin is "dead" while flashing to 
micaz, it reposts:
 $ make micaz install,1 mib510,com3
 mkdir -p build/micaz
     compiling Blink to a micaz binary
 ncc -o build/micaz/main.exe -Os -finline-limit=100000 -Wall -Wshadow 
-DDEF_TOS_A
 M_GROUP=0x7d -Wnesc-all -target=micaz -fnesc-cfile=build/micaz/app.c 
-board=mica
 sb -I%T/lib/Deluge -DIDENT_PROGRAM_NAME=\"Blink\" -DIDENT_USER_ID=\"CalvinMa\" 
-
 DIDENT_HOSTNAME=\"Calvin\" -DIDENT_USER_HASH=0x203506aeL 
-DIDENT_UNIX_TIME=0x45e
 de117L -DIDENT_UID_HASH=0x8903e58eL -I/opt/tinyos-1.x/tos/lib/CC2420Radio 
Blink.
 nc -lm
     compiled Blink to build/micaz/main.exe
             1662 bytes in ROM
               49 bytes in RAM
 avr-objcopy --output-target=srec build/micaz/main.exe build/micaz/main.srec
 avr-objcopy --output-target=ihex build/micaz/main.exe build/micaz/main.ihex
     writing TOS image
 set-mote-id build/micaz/main.srec build/micaz/main.srec.out-1 1
 Could not find symbol TOS_LOCAL_ADDRESS in build/micaz/main.exe, ignoring 
symbol.
 
     installing micaz binary using mib510
 uisp -dprog=mib510 -dserial=com3 --wr_fuse_h=0xd8 -dpart=ATmega128 
--wr_fuse_e=f
 f  --erase --upload if=build/micaz/main.srec.out-1
 Cygwin is dead here....
 
 Do you have a clue what's happening here? Also, as you can see, it "Could not 
find symbol TOS_LOCAL_ADDRESS in build/micaz/main.exe, ignoring symbol." But I 
think I assign "0" as the tos_local_address in my command line, don't I?
 
 Thank you for your kind help.
 
 -Steve
 
---------------------------------
Never miss an email again!
Yahoo! Toolbar alerts you the instant new Mail arrives. Check it out.
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help

Reply via email to