Hi Keerthi,
The interfaces that you're using do not exist. If you look at the
nesdoc for the MicDriverC component, you will see:
interface SensorInterrupt as MicInterrupt;
interface Potentiometer as MicInterruptThreshold;
Your application should mirror these lines in its "uses" block.
-Joe
On 3/6/07, Keerthi Iyengar <[EMAIL PROTECTED]> wrote:
Hey guys,
I had previously asked about MicInterrupts,
I am relatively new to NesC and tinyos programming. I am using the tmote
invent and I am compiling using "make tmoteinvent"
In my configuration, I have wired
rcP.MicInterrupt -> MicDriverC; //rcP is my implementation in my
program
From the file MicDriverM file in
C:\cygwin\opt\moteiv\tos\sensorboards\invent , you need to implement
async event void MicInterrupt.fired() {
}
However when i compile it is saying "'fired' is not in interface
'MicInterrupt'
Instead it asks me for 'MicInterrupt.toneDetected' which is something to
do with the mica platform from what I have seen. The exact error is:
In file included from rcC.nc:8:
In component `rcP':
rcP.nc:6: interface MicInterruptThreshold not found
rcP.nc:6: interface MicInterruptThreshold not found
In file included from rcC.nc:8:
rcP.nc:36: `fired' is not in interface `MicInterrupt'
rcP.nc:40: `setDone' is not in interface `MicInterruptThreshold'
rcP.nc:13: `MicInterrupt.toneDetected' not implemented
Can someone help me out? I can't see anything wrong with my code.
Regards
Keerthi
------------------------------------------------------------------------
configuration rcC {
}
implementation {
components Main;
components new MainControlC() as MainMicC;
components rcP;
components DelugeC;
components MicDriverC;
components UserButtonAdvancedC;
components LedsC;
components new TimerMilliC() as LedsTimerC;
Main.StdControl -> rcP;
MainMicC.SplitControl -> MicDriverC;
rcP.MicInterrupt -> MicDriverC;
rcP.MicInterruptThreshold ->MicDriverC;
rcP.Button -> UserButtonAdvancedC;
rcP.Leds -> LedsC;
rcP.LedsTimer -> LedsTimerC;
}
------------------------------------------------------------------------
module rcP{
provides interface StdControl;
uses interface MicInterrupt;
uses interface MicInterruptThreshold;
uses interface ButtonAdvanced as Button;
uses interface Leds;
uses interface Timer2<TMilli> as LedsTimer;
}
implementation {
// StdControl
command result_t StdControl.init() {
return SUCCESS;
}
command result_t StdControl.start() {
call Button.enable();
return SUCCESS;
}
command result_t StdControl.stop() {
return SUCCESS;
}
event void LedsTimer.fired() {
}
async event void MicInterrupt.fired() {
}
event void MicInterruptThreshold.setDone(uint8_t _gain, result_t _result) {
}
// Button clicking
async event void Button.multiClick( uint8_t count ) {
}
async event void Button.longClick( uint32_t time ) {
}
}
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
