I don't think it is possible to program Cricket directly though its serial port. The reason because Cricket doesn't have an on-board co-processor that is required for programming the ATmega128 processor. You would need a programming board such as MIB510 or MIB520 to program Crickets.
Regards, Giri -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Stephen Chow Sent: Friday, April 13, 2007 12:23 AM To: tinyos help Subject: [Tinyos-help] write firmware via serial port Dear, I have some cricket nodes, on which there are a 51 pin and a serial port. Generally, I plug cricket's 51pin into MIB510 board in order to write firmware program. I am wondering if there is possibility that I can write firmware into cricket via serial port. I mean I use a line to connect directly between Computer's and Cricket's serial port. B.R Stephen _______________________________________________ Tinyos-help mailing list [EMAIL PROTECTED] https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-hel p _______________________________________________ Tinyos-help mailing list [EMAIL PROTECTED] https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
