Hi Marios, The example application section of the following MDA300 datasheet (courtesy Mohd. Rahimi, UCLA) shows how to connect Davis rain gauge to MDA300. http://www.cens.ucla.edu/%7Emhr/daq/datasheet.pdf It also demonstrates sample code implementation for the sensor. I hope that helps. Giri
________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Marios Milis Sent: Monday, April 16, 2007 12:33 AM To: [email protected] Subject: [Tinyos-help] Davis Rain Collector Hi all, Could anyone help me in connecting the Davis Rain Collector on the MDA300 data acquisition board? It uses three wires and its manual refers that It gives a digital output. Any help would be appreciable Thanks a lot in advance MM ----------------------------------------------------- Mr Marios Milis Project Manager, SignalGeneriX Ltd Maximos Court, Block B 3rd Floor Leontiou A P.O.Box 51341 3504 Limassol Cyprus Telephone: +357 25870072 Fax: +357 25870076 Email: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> www.signalgenerix.com <http://www.signalgenerix.com/> ----------------------------------------------------- This message and any files transmitted with this email are legally privileged and intended for the sole use of the individual(s) to whom they are addressed. Access to this e-mail by anyone else is unauthorised, and any disclosure, copying, distribution or other use of this e-mail is prohibited and may be unlawful. We will not under any circumstances have any responsibility or liability arising out of or in connection with any unauthorised use of this e-mail. Please notify the sender if you have received this in error.
_______________________________________________ Tinyos-help mailing list [email protected] https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
