Thanks,
I can't seem to figure out whats going on - i'm sure its not the motes
- both are sending as SENDDONE is being called and returned sucess.
The basestation still only recieves on the packets - This only occurs
when the base station is the source of the transmition
Regards,
Hamdi
Quoting Michael Schippling <[EMAIL PROTECTED]>:
That kind of depends...if all the motes can "hear" each other
there is a good chance that the CDMA (CSMA? I always forget...)
mechanism will work and one will defer to another that got there
first. But it doesn't always work. And the micaZ seems to work
better than the mica2 in this respect.
If you are predictably missing messages this is probably not
the problem, but it can contribute.
TOSBase just passes everything it gets along to the UART,
except it may filter out groupIDs that don't match...
MS
Hamdi Roumani wrote:
After a packet is sent from a basestation and if 2 motes reply by
simply resending the same message back to the basestation it
interfernce likely to cause one of the msgs not to be received? -
in other words after outputing a packet from TOS_Base is there
anything special that needs to be done if your going to reply to
the msg from multiple motes at the same time.
Also does TOS_Base drop received packets if they are the same, or
for any other reason?
--Regards,
Hamdi
----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
