Yes, /usr/local/bin is in my directory. ³which avr-objcopy² returns:
/usr/local/bin/avr-objcopy
³make micaz² in the Blink directory returns:
[Greg:tinyos-1.x/apps/blink] greg% make micaz
/Users/greg/Documents/Sources/tinyos-1.x/tos/../apps/Makerules:335: *** mica
mica2 mica2dot pc all micaz
Usage: make <platform>
make all
make clean
make install[.n] <platform>
make reinstall[.n] <platform> # no rebuild of target
make docs <platform>
Valid platforms are: mica mica2 mica2dot pc
. Stop.
I¹m guessing I need a make rule for micaz?
Thanks,
Greg Turnipseed
From: Sarfraz Nawaz <[EMAIL PROTECTED]>
Date: Tue, 24 Apr 2007 10:59:25 +1000
To: Greg Turnipseed <[EMAIL PROTECTED]>
Cc: Michael Schippling <[EMAIL PROTECTED]>, tinyos-help
<[email protected]>
Subject: Re: [Tinyos-help] Complete Novice Question: Installing TinyOS and
Compiling on MacOSX 10.4 for MICA
Are these also in your path? What is the output of "which avr-objcopy". If
it is in your path what happens when you do lets say "make micaz" in Blink?
On 4/24/07, Greg Turnipseed <[EMAIL PROTECTED]> wrote:
> Yes, I have avr-objcopy and avr-gcc installed. They're located in the
> /usr/local/bin directory.
> TOSDIR=/Users/greg/Documents/Sources/tinyos-1.x/tos
> TOSROOT=/users/greg/Documents/Sources/tinyos-1.x
>
> These are correct, as far as I can tell. Inside the TOSDIR path are the
> folders "interfaces","lib","platform","sensorboards","system", and "types".
> TOSROOT just points to my tinyos directory, like yours does.
>
> MIB520=/dev/tty.usbserial-XBPSJ9TXA
> MOTECOM=/dev/tty.usbserial-XBPSJ9TXB
>
> I'm using the USB version (MIB520), and so I think that part's correct. It's
> just supposed to point to where the serial port is, correct? What about
> MOTECOM?
>
> What does this mean as far as not being able to find "Timer","Leds", etc.?
>
> Thanks,
> Greg Turnipseed
>
>
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
