Hi, all, again. I tried adding the line you requested. The output's attached (using >out.txt only captured the first line, so I ran it again without redirecting the output, copied, and pasted into a text file.)
Thanks, Greg Turnipseed > From: Michael Schippling <[EMAIL PROTECTED]> > Reply-To: <[EMAIL PROTECTED]> > Date: Thu, 26 Apr 2007 12:38:03 -0600 > To: Greg Turnipseed <[EMAIL PROTECTED]>, TINYOS HELP > <[email protected]>, Sarfraz Nawaz <[EMAIL PROTECTED]> > Subject: Re: [Tinyos-help] Compiling on MacOSX 10.4 for MICA > > Well that blows one of my pet theories... > > The thing you want is your second page with > PFLAGS += -v > in the Blink/Makefile. > > You'll note that it is a bit longer, shows some sub-commands, > and lists all the files it is trying to access. My theory was > that -mmcu=atmega128 was not getting set or something like that, > but there is is plain as day...heck. I also note that whatever > you are doing is making output like sarfraz and not me, because > you have "-_fnesc-include=nesc_nx" but I don't see a message about > preprocessing it. Or one about your nescc version number. > > As a last ditch, just in case I'm sort of right about the atmega128 > thing, you could try adding this to the PFLAGS: > > PFLAGS += -v -D__AVR_ATmega128__ > > Which (I hope) will force the definition of the theoretically > missing define needed by avr/io.h. Note that there are 2 underscores > on each end of the text. > > But most likely you have some mis-match of compile tools. > Perhaps finding and re-installing the latest working set > is the next step. > > And...XLS? errg... You should be able to redirect the output of > your make into a file like this: > > make mica2 > output.txt > > And send it as a raw text file. > > MS > > > > Greg Turnipseed wrote: >> All right, I assume the makefile I was supposed to add the line to was the >> makefile inside the Blink directory, so that¹s where I made the modification. >> It doesn¹t seem to have changed anything, but I¹ll attach what I¹ve got >> anyway. The first sheet is without any modification (i.e., without the added >> line). The second sheet is with exactly what was written (PFLAGS += -v), and >> the third sheet is with ³set PFLAGS += -v², just in case my using tcsh >> affects that in any way. >> >> Let me know what y¹all see in the output. >> >> Thanks, >> Greg Turnipseed >> >> >> From: Sarfraz Nawaz <[EMAIL PROTECTED]> >> Date: Thu, 26 Apr 2007 16:29:33 +1000 >> To: Greg Turnipseed <[EMAIL PROTECTED]> >> Cc: TINYOS HELP <[email protected]>, Michael Schippling >> <[EMAIL PROTECTED]> >> Subject: Re: [Tinyos-help] Compiling on MacOSX 10.4 for MICA >> >> Greg, >> >> Can you add >> >> PFLAGS += -v >> >> to the Makefile and then send the output. I am attaching my ouput. In my >> compile the first thing that is pulled in is /usr/lib/ncc/nesc_nx.h >> followed by /opt/tinyos-1.x/tos/system/tos.h and then the compiler goes on >> happily compiling Blink. >
out.txt
Description: Binary data
_______________________________________________ Tinyos-help mailing list [email protected] https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
