Are you using the right MOTECOM setting when you start the SerialForwarder?
Make sure it's talking to the correct serial port, etc...
Also check all your cables and the base-station power.
I would backup and try using Listen or ListenRaw without SF to see if I could
get messages from the re-Motes. And then try some simple Send type program
to send messages back. The standard TOSBase will toggle it's leds when
it sends and receives messages so you can see if anything is really happening.
MS
Javier Barbarán wrote:
Hi everybody
I have installed 1.1.11 version and in the beginning SerialForwarder
application does not give me the write failed message when I sent packet
to motes. But maybe I have changed something (I really don't know what)
and now executing BcastInject, I get write failed in the serialforwarder
but the mote receive the message. But also, I have a java application
where a remote mote send data to base station and java application
process the message in order to answer to the mote. Again in the
beginning the system worked fine but know the mote send data to base
station (with TOSBase installed on base station mote) that receives the
message but it isn't processed. It seems that is something related to
baudrate or something similar, I have been looking through the mailing
list archives and I have tried some actions, but it doesn't work. I have
also tried to re-install tinyOS 1.1.11 but the problem stills...
Could you give me any suggestion... I hope so...
Thanks in advance...
Regards
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
