Hi, If you use TinyOS-1.x, you can achieve it with assigning different channel numbers to each sensor. Oscilloscope application shows the mote id and channel to eparate each sensor readings. If you use T2, i wonder the answer and i want to know it. Because in osilloscope application, there is no channel number.
Firat TARAKTAS Electrical&Electronics Engineer Reseracher GENETLAB INFORMATION TECHNOLOGIES Kayisdagi Caddesi Kar Plaza D Blok Kat:3 34752 Icerenkoy / ISTANBUL / TURKIYE Phone: +90 (216) 573 00 85 (int.354) Fax: +90 (216) 469 85 07 [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> www.genetlab.com <http://www.genetlab.com/> ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ferry Cialis Sent: Monday, May 21, 2007 11:44 AM To: [email protected] Subject: [Tinyos-help] Oscilloscope single mote multiple channel display Hello, I'd like to know whether it is possible for Oscilloscope java application to display multiple sensor readings from a single mote? For instance, I have a sensor board which has accelerometer-x, accelerometer-y and temperature sensors. The sensor board is mounted onto a single mote. Can the Oscilloscope application display multiple sensor channels from the setup? I've tried displaying multiple channels before but it requires multiple motes, each mote corresponding to one channel but it's not efficient and quite wasteful to have many motes if I can use just one mote to display multiple readings. Thank you
_______________________________________________ Tinyos-help mailing list [email protected] https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
