Apparently your update wasn't complete. How do you update your tree?
I use
cvs update -A -d
in the tinyos-2.x directory. But be careful if you have modified any
tinyos files (either code files or makefiles, makelocals, and such)
because if the version in the cvs repository is newer than your
modification, it will be updated as well.
Regards,
Hugo S.
On 5/24/07, Bernardo Avila Pires <[EMAIL PROTECTED]> wrote:
Hello again
Both have ResourceController interface. Am I supposed to just replace
ResourceDefaultOwer por ResourceController? Can I use MicaBusC PW1 instead
of Int1? I think it should be there...
Thanks again
Regards
Bernardo
2007/5/24, Bernardo Avila Pires <[EMAIL PROTECTED]>:
> I'm having a problem like that. I found in the archives a message from
David Gay, according to which we should update the tree because this was
due to some inconsistent tree.
> It happens that I have updated it, but nothing really changed.
>
> When I try to compile things using mts300 (including Sense application),
these error messages appear:
>
> (using command : SENSORBOARD=mts300 make mica2 install mib510,/dev/ttyS0 )
>
> In component `PhotoTempDeviceC':
>
/opt/tinyos-2.x/tos/sensorboards/mts300/PhotoTempDeviceC.nc:24:
cannot find `ResourceDefaultOwner'
>
/opt/tinyos-2.x/tos/sensorboards/mts300/PhotoTempDeviceC.nc:29:
cannot find `Int1'
>
/opt/tinyos-2.x/tos/sensorboards/mts300/PhotoTempDeviceC.nc:34:
cannot find `ResourceDefaultOwner'
>
/opt/tinyos-2.x/tos/sensorboards/mts300/PhotoTempDeviceC.nc:39:
cannot find `Int2'
>
> I changed some stuuf in the files after that but the sensors didn't work
(just the sounder) =/
> But these errors appear when I use the original files from the tree.
>
> I've noticed that PhotoPower (SplitControlPowerManagerC.nc) doesn't use
the interface ResourceDefaultOwner and that PhotoArbiter
(RoundRobinArbiterC.nc) doesn't provide it. Yet, there it is, a wiring
through this interface... And no Int1 in MicaBusC either.
>
> Well, thanks in advance.
> Regards,
> Bernardo
>
>
> 2007/5/7, Fangming Zhang < [EMAIL PROTECTED]>:
> >
> > Hi everyone,
> >
> > I put all MTS300 files in sensorboards folder and name this folder as
micasb like : '../tos/sensorboards/micasb'. I compiled it using command
like:
> > SENSORBOARD=micasb make micaz
> >
> > However, there is an error: In component `AccelConfigP':
> >
/opt/tinyos-2.x/tos/sensorboards/micasb/AccelConfigP.nc:33:
cannot find `Resourc
> > eDefaultOwner'.
> >
> > But, there is a file called ResouceDefaultOwner.nc in 'tos/interfaces'.
Where is problem?
> >
> > Regards,
> > Fangming
> >
> >
> > _______________________________________________
> > Tinyos-help mailing list
> > [email protected]
> >
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
> >
>
>
>
> --
> "Segmentation Fault"
> ...de onde concluímos que a falha de segmentação é
ninfomaníaca.
--
"Segmentation Fault"
...de onde concluímos que a falha de segmentação é
ninfomaníaca.
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
