Hi Junyan, we did try setting the identical fuse bits, bit still had no success. the procedure we followed was--- 1. use tinyos make and avr-objcopy to generate am ihex file for mica2. 2. read the fuse bits from a mica2 3. set identical fuse bits for out platform via icc-avr 4. flash the ihex code via icc-avr onto our device ... no Blinking yet.
the hardware looks correct. Moreover a Blink program written in icc-avr (which toggle bits on port A) when flashed on the device works correctly. Any help/direction on this would be helpful. many thanks, - Puru On 5/5/07, Junyan Ma <[EMAIL PROTECTED]> wrote:
Hi Puru, If you would like to fire the tinyos app on your mote, you should first set the ATmega128L's fuses correctly.( by using the 'uisp' command). 1. read the fuese of a mote from corssbow 2. set your mote fuese with the same value 3. it's blinking :) -- Best regards, Junyan Ma A804 Aviation Building Northwestern Polytechnical University Xi'an, Shaanxi, China P.R. EMAIL: alexmajy at gmail dot com MSN: alexmajy at hotmail dot com FAX: + 86 029 88494593 TEL: + 86 13609169326
-- "True compassion is more than flinging a coin at a beggar." - Rev. Dr. Martin Luther King, Jr. _______________________________________________ Tinyos-help mailing list [email protected] https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
