Hello, I work on the MEP-SYS enviromental system from crossbow. With the enviromental system came the MoteView 1.2. I tried to change Data Rate of motes. Beofre that , motes periodically sent their data exactly every 3 minutes. But when I tried to change the Data Rate to 6 minutes, they lost their synchronisation , and now some motes are sending data 10 times per minute, and some almost never.
I tried to reprogramm the Base Station (MBR 410) (with XMesh_Base_lp), but after some time, led 1 and 2 turned on, and led 3 blinks every 30 seconds. Does anyone have some experience with these devices, and is there a way I could return the system into the original state? I'm not sure how te reprogramm the motes ( MEP 410 and MEP 510) over the air, and any instructions would be more then useful. Regards, Ognjen Popovic
_______________________________________________ Tinyos-help mailing list [email protected] https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
