Thank you very much Phil. You were right, my nesc from the tinyos 1 install was used.
Now everything is working alright. With the micaz sim at least. Do you know whether other platforms will be supported as simulations ? Marek Am Dienstag, den 05.06.2007, 10:37 -0700 schrieb Philip Levis: > On Jun 5, 2007, at 10:27 AM, Marek Jawurek wrote: > > > Thanks for looking into it Phil, here is what > > avr-objdump -t build/micaz/sim.o > > produces. > > > > I am sorry but actually I can hardly grasp at what I am looking. > > But it appears that the sim.o object file is in elf32-avr format and > > tossim.o and pytossim.o both in elf32-little. But where is the > > difference ? When I call make micaz sim I get some different errors on > > top. I appended the output of that call to the end. > > > > > > build/micaz/sim.o: file format elf32-avr > > This is the problem: for some reason, TOSSIM is compiling sim.o using > avr-gcc rather than gcc. That is, it's compiling it for an atmega128 > microcontroller instead of your x86 processor. > > If you add the -v option to your CFLAGS you might be able to figure > out what's going on. > > Do you have an existing TinyOS 1.x install on this machine? If so, my > guess is that you're calling the wrong ncc. Try ncc --version. You > should have 1.2.1 or 1.2.3. Try 'which ncc' to figure out which one > you're executing, and look in /usr/bin as well as /usr/local/bin for > the right one. > > Phil > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help -- Marek Jawurek <[EMAIL PROTECTED]> _______________________________________________ Tinyos-help mailing list [email protected] https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
