Hi Yu-En,
It seems that you don't have the latest "bnp.extra" in
"tinyos-2.x/support/make/" directory. Could you please update your CVS
tree and try again?
Mike
Yu-En Tsai wrote:
> Thanks...but here are still other questions:
> I run "./burn /dev/ttyS0 micaz" and it didn't work when installing
> bootloader:
>
> ************************************************************
> installing micaz bootloader using mib510
> uisp -dprog=mib510 -dserial=/dev/ttyS0 --wr_fuse_h=0xd9 -dpart=ATmega128
> --wr_fuse_e=ff --upload if=
> Firmware Version: 2.1
> Atmel AVR ATmega128 is found.
> Error: No such file or directory
> ->
> make: *** [program_bl] Error 1
> **************************************************************
> I was adding "BOOTLOADER ?= $(TOSDIR)/lib/TOSBoot/build/micaz/main.srec"
> into micaz.target,
> then there was no complaint about installing bootloader.
> However, I still couldn't retrieve any image information.
>
> I was guessing it's because I couldn't install GoldenImage, then I tried
> install it.
> Now the compiler complains the component DelugeC cannot be found:
>
> *****************************************************************
> $ CFLAGS=-DDELUGE_BASESTATION make micaz install mib510,/dev/ttyS0
> mkdir -p build/micaz
> compiling GoldenImageC to a micaz binary
> ncc -o build/micaz/main.exe -Os -finline-limit=100000 -Wall -Wshadow
> -Wnesc-all
> -target=micaz -fnesc-cfile=build/micaz/app.c -board=micasb -Ibuild/micaz
> -DDELUG
> E_BASESTATION -DDELUGE_BASESTATION -fnesc-dump=wiring
> -fnesc-dump='interfaces(!a
> bstract())' -fnesc-dump='referenced(interfacedefs, components)'
> -fnesc-dumpfile=
> build/micaz/wiring-check.xml GoldenImageC.nc -lm
> In component `GoldenImageC':
> GoldenImageC.nc:31: component DelugeC not found
> make: *** [exe0] Error 1
> ****************************************************************
>
> Is there some problem about Makefile?
> How can I modify it?
>
> Thanks!!!
> Yu-En
>
> On 6/16/07, *Chieh-Jan (Mike) Liang* <[EMAIL PROTECTED]
> <mailto:[EMAIL PROTECTED]>> wrote:
>
> Hi Yu-En,
>
> It seems that you don't have pySerial installed, which allows
Python to
> do serial communication. pySerial is available at
> http://pyserial.sourceforge.net/
>
> Mike
>
> Yu-En Tsai wrote:
> > Hi,
> > I was trying to use Deluge T2. I followed the programming manual
> by JHU.
> > I have done the first 2 steps: ./Bootstrap and ./configure, but I
> have
> > no idea
> > about how to install it: "make" and "make install" don't work.
> >
> > Moreover, when I tried to run the script, there is an import
error:
> > (./tos-deluge /dev/ttyS0 micaz -p 0)
> >
> > Traceback (most recent call last):
> > File "./tos-deluge", line 35, in <module>
> > import tinyos
> > File "/opt/tinyos-2.x/tools/tinyos/misc/tinyos.py", line 1, in
> <module>
> > import struct, time, serial, socket
> > ImportError: No module named serial
> >
> > Anyone has idea?
> >
> > Thanks a lot
> > Yu-En Tsai
> >
> >
> >
>
------------------------------------------------------------------------
>
> >
> > _______________________________________________
> > Tinyos-help mailing list
> > [email protected]
> <mailto:[email protected]>
> >
>
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>
>
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
