We have acquired a development board for an MSP430F1611 microprocessor from Olimex (www.olimex.com) and we would like to develop a serial program interface using a serial port to interconect this board with the Windows XP-cygwin-tinyOS2.x environment. We are using 2 ST3232 (RS-232 interface chips) to interconnect signals RX, TX, DTR and RTS comming from PC's serial port to MSP430 micro's RXD1, TXD1, TCK and RST pins respectevely. We have also connected the TXD1 pin to BSLTX pin and RXD1 pin to BSLRX pin When we try to program device using the command "make telosb install bls,0" where 0 refers to COM1 we get an error output about" no synchronization with bootstrap loader". We believe that maybe the problem is that we are not using the ADG715BRU chip presented in the original Telosb schematic and we don't understand very well the functionality of such component to chek this believe. we have looked for this chip in internet and only SMD package version is available. We would like to know if it exist any equivalent chip using DIP package.
We would appreciate any aditional information to help us. Thanks. Juan Antonio
_______________________________________________ Tinyos-help mailing list [email protected] https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
