> > > Gain is the attenuation of the signal between the two nodes. It is in > dB. > > > > Currently, TOSSIM assumes that nodes transmit at 0dBm. The idea is that > one could include simulation support for changing the TX power level. > Currently there isn't such support. > > > > Therefore, if you have an attenuation of -85dB and a constant noise > floor of -90dBm, your SNR will be 5dB. > > > > Phil > > What would the RSSI (in dBm) at "dest" be in this situation? > > Thanks, > Tal >
Hello Tal, If you have an attenuation of -85dB and TX power level 0 dBm (as mentioned above) then you will have RSSI -85 dBm at destination point. Regards, Aleksandr. wbr, Sadkov Aleksandr [EMAIL PROTECTED] www.sumkino.com www.wl.unn.ru _______________________________________________ Tinyos-help mailing list [email protected] https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
