Hi, Fortunately, I found out I worked by myself. Probably, the connection with micaz and programming board might have not fixed. This morning, I tightly combined mote with programming board. Now, It works. I can see blink by LEDs of both programming board and mote (I am testing Blink application).
The setting is as follows : micaz mote : don't have battery, switch ON MB510 programming board : power connected, switch ON Cable : DB9(MB510) - USB(Notebook computer,Linux, TinyOS 2.0.1) The command for installing and messages are as follows # make micaz reinstall mib510,/dev/ttyUSB0 cp build/micaz/main.srec build/micaz/main.srec.out installing micaz binary using mib510 uisp -dprog=mib510 -dserial=/dev/ttyUSB0 --wr_fuse_h=0xd9 -dpart=ATmega128 --wr_fuse_e=ff --erase --upload if=build/micaz/main.srec.out Firmware Version: 2.1 Atmel AVR ATmega128 is found. Uploading: flash Fuse High Byte set to 0xd9 Fuse Extended Byte set to 0xff rm -f build/micaz/main.exe.out build/micaz/main.srec.out ----------------------------------------------------------------------------------------------------------------------------------------- I am so sorry If I have bothered you. Thanks. 2007/7/17, DAE HEE KIM <[EMAIL PROTECTED]>:
I am using TinyOS 2.0.1 Thanks. 2007/7/17, DAE HEE KIM <[EMAIL PROTECTED]>: > > Hello. > > I have been trying to connect from mynotebook computer to motes(micaz). > However, I cannot succeed that works. > I already read FAQ in TinyOS website about error messages for connecting > mote. (damaged...., flash memeory..., ) > > My test environment is as follows. > > mote : micaz (2.4 Ghz) > cable : DB9 to USB ( programming board(MB510) - DB9 serial port, my > notebook computer - USB ) > OS : Fedora core 6 > programming board (MB510) > > I know my question is very basic thing. However, I couldn't start my > project (testbed) for not connecting to mote. > Q) Do I have to install USB Driver into my Linux OS ? or Are there any > emulation for USB ? > Could you help me ? > > PS) Also, I tried to use another programming board such as MB520 which > can be directly conntected to USB port without cable. However, It didn't > work. > -- > DaeHee Kim (Danny) > Department of Computer Science, State University of NewYork at > Binghamton. > Cell Phone : 1-607-321-9574 > Address : 13-A Andrea Dr, Vestal, NY, 13850 > email-address : [EMAIL PROTECTED] , [EMAIL PROTECTED] -- DaeHee Kim (Danny) Department of Computer Science, State University of NewYork at Binghamton. Cell Phone : 1-607-321-9574 Address : 13-A Andrea Dr, Vestal, NY, 13850 email-address : [EMAIL PROTECTED], [EMAIL PROTECTED]
-- DaeHee Kim (Danny) Department of Computer Science, State University of NewYork at Binghamton. Cell Phone : 1-607-321-9574 Address : 13-A Andrea Dr, Vestal, NY, 13850 email-address : [EMAIL PROTECTED], [EMAIL PROTECTED]
_______________________________________________ Tinyos-help mailing list [email protected] https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
