Hi,
I've made a wrapper program to use Msp430Adc12Multichannel that I'm
having trouble with. It compiles OK, but the Adc configure doesn't
return SUCCESS.
Testch12AdcP.nc executes up to before this command OK, (confirmed by an
led on debug call).
if ( call ch12Adc.configure(&config, memctl, numMemctl, buffer,
numSamples, jiffies) == SUCCESS){
The above line is in:
http://ecosensory.com/Testch12AdcP.nc
http://ecosensory.com/Testch12AdcC.nc
The wrapper modules the above line calls are:
http://ecosensory.com/ch12AdcC.nc
http://ecosensory.com/ch12AdcP.nc
http://ecosensory.com/Msp430Adc12.h
This command gets executed, (confirmed by an led on debug call).
async command error_t ch12Adc.configure(const
msp430adc12_channel_config_t *config, adc12memctl_t *memctl, uint8_t
numMemctl, uint16_t *buffer, uint16_t numSamples, uint16_t jiffies)
{
if (call multichannel.configure(config, memctl, numMemctl, buffer,
numSamples, jiffies) == SUCCESS) {
return SUCCESS;
call Leds.led2On(); //debug aid
But no led for this last call.
If your eyes can see a mistake, I'd appreciate hearing about it...
The wrapper code is just to act just like an ordinary use of
Msp430Adc12Multichannel to start with so I can add a mux function to it.
John Griessen
--
Ecosensory
tinyOS devel on: ubuntu Linux; tinyOS v2.0.2; telosb ecosens1
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
