Hi Romain This is regarding the problem which you faced while sending the data to the BaseStation from SerialForwarder(SF) when it continuously gives the "Write Failed" event. Let me know if you got any success with that.
I did few things and later found that the problem lies in the mote: 1. I stopped the SF, removed the modules controlling my mote from the linux kernel i.e. usbserial and ftdi-sio while the mote is still plugged in. I restarted all the components and the sitaution was the same. However, the mote was getting continous power from the USB all the time. 2. While the SF was running and "Write Failed" event coming up on every attempt to send data, I pushed the "reset" button on the telosB. This was a mild success as the SF app was able to send the data after this. Right now I am thinking in a direction that the mote should stop and restart the radio and the UART if such an event occurs. This is not a good technique but does help in automating the reset scenario. Do let me know fi you were able to get rid of this error completely. Regards -- Mayur Maheshwari([EMAIL PROTECTED]) "Karmanye Vadhikaraste Ma Phaleshu Kadachana, Ma Karma Phala Hetur Bhurmatey Sangostva Akarmani"
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
