Hi, *** I am re-posting this question since there was no response the last time. I do hope someone can guide me this time ***
I am a grad student in Toronto. It would be very nice if someone could help me out a little bit with the following problem I am facing. When I compile a custom tinyos app (Blimps) using "make micaz", the app compiles (with a few async call and non-atomic read/write warnings). This app is roughly doing the same function as Surge. The difference is that it senses some items (light, temp, humidity etc) using the MTS400 sensorboard and sends it to the PC. On the PC the modified java app (oscilloscope) plots only the temperature readings. The "Blimps" app uses standard Multihop routing and I've downloaded the MTS400 support files from /contrib/xbow/tos/sensorboards/mts400 CVS folder, and placed into /tos/sensorboards on the local hard drive. I've also downloaded /contrib/xbow/tos/interfaces/SoDebug.h and placed into /tos/interfaces on the local hard drive. If I try to compile using "make pc" (for TOSSIM), I get a lot of compilation warning messages, unfortunately ending in the app not compiling. The bulk of the errors seem to related to bunch of "unidentified identifiers". Was wondering if someone could help me compile the app sucessfully ? It seems these identifiers (e.g. UBRR0H) are defined in /usr/local/avr/include/avr/iom128.h /usr/local/avr/include/avr/iom162.h /usr/local/avr/include/avr/iom169.h /usr/local/avr/include/avr/iom64.h .. and it seems these files in turn are "included" via <io.h> I don't understand why "make micaz" compiles, while "make pc" indicates "unidentified identifiers" for the same app. In case, I need to provide any other information to help someone suggest possible answers, please let me know. At the moment I do not know if I am allowed to post messages with attachments (source files of the Blimps app). btw, this is just the first step towards trying to integrate TinySec into this app. Hope I can find a solution via the group's help. Thank you to everyone who tries to help me out. - Ajay, Toronto. compilation excerpt follows (the actual warnings/errors are a lot, this is just a small portion obtained by pressing Ctrl-C): $ make pc mkdir -p build/pc compiling Blimps to a pc binary ncc -o build/pc/main.exe -g -O0 -I%T/lib/Route -I%T/lib/Queue -I%T/lib/BroadCast -pthread -fnesc-nido-tosnodes=1000 -fnesc-simulate -Wall -Wshadow -DDEF_TOS_AM_GROUP=0x7d -Wnesc-all -target=pc -fnesc-cfile=build/pc/app.c -board=mts400 -DIDENT_PROGRAM_NAME=\"Blimps\" -DIDENT_USER_ID=\"user\" -DIDENT_HOSTNAME=\"awmxdp\" -DIDENT_USER_HASH=0x9cffc329L -DIDENT_UNIX_TIME=0x46d9c0afL -DIDENT_UID_HASH=0xd8d6038eL Blimps.nc -lm In file included from C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/sensorboards/mts400/SensirionHumidityM.nc:93: C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/interfaces/SODebug.h:124:1: warning: "SO_DEBUG" redefined In file included from <command line>:19:C:/PROGRA~1/UCB/cygwin/tmp/nesccppm000808:1791:1: warning: this is the location of the previous definition In file included from C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/sensorboards/mts400/SensirionHumidityM.nc:93: C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/interfaces/SODebug.h: In function `init_debug': C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/interfaces/SODebug.h:15: `UBRR0H' undeclared (first use in this function) C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/interfaces/SODebugh:15: (Each undeclared identifier is reported only once C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/interfaces/SODebug.h:15: for each function it appears in.) C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/interfaces/SODebug.h:16: `UBRR0L' undeclared (first use in this function) C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/interfaces/SODebug.h:17: `U2X' undeclared (first use in this function) C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/interfaces/SODebugh:17: `UCSR0A' undeclared (first use in this function) C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/interfaces/SODebug.h:18: `UCSZ1' undeclared (first use in this function) C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/interfaces/SODebugh:18: `UCSZ0' undeclared (first use in this function) C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/interfaces/SODebugh:18: `UCSR0C' undeclared (first use in this function) C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/interfaces/SODebug.h:19: `UDR0' undeclared (first use in this function) C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/interfaces/SODebug.h:20: `TXEN' undeclared (first use in this function) C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/interfaces/SODebugh:20: `UCSR0B' undeclared (first use in this function) C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/interfaces/SODebug.h: In function `init_debug_mica2dot': C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/interfaces/SODebug.h:26: `UBRR0H' undeclared (first use in this function) C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/interfaces/SODebugh:27: `UBRR0L' undeclared (first use in this function) C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/interfaces/SODebugh:28: `UCSR0A' undeclared (first use in this function) C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/interfaces/SODebug.h:29: `UCSZ1' undeclared (first use in this function) C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/interfaces/SODebugh:29: `UCSZ0' undeclared (first use in this function) C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/interfaces/SODebugh:29: `UCSR0C' undeclared (first use in this function) C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/interfaces/SODebug.h:30: `UDR0' undeclared (first use in this function) C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/interfaces/SODebug.h:31: `TXEN' undeclared (first use in this function) C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/interfaces/SODebugh:31: `UCSR0B' undeclared (first use in this function) C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/interfaces/SODebug.h: In function `UARTPutChar': C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/interfaces/SODebug.h:38: implicit declaration of function `loop_until_bit_is_set' C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/interfaces/SODebug.h:38: `UCSR0A' undeclared (first use in this function) C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/interfaces/SODebugh:38: `UDRE' undeclared (first use in this function) C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/interfaces/SODebug.h:39: implicit declaration of function `outb' C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/interfaces/SODebug.h:39: `UDR0' undeclared (first use in this function) C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/sensorboards/mts400/SensirionHumidityM.nc: In function `SwitchI2W.setDone': C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/sensorboards/mts400/SensirionHumidityM.nc:191: implicit declaration of function `bit_is_set' C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/sensorboards/mts400/SensirionHumidityM.nc: In function `Timer.fired': C:/PROGRA~1/UCB/cygwin/opt/tinyos-1.x/tos/sensorboards/mts400/SensirionHumidityM.nc:223: implicit declaration of function `bit_is_set' make: *** [exe0] Interrupt
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
