Hi,
I'm planning on setting up an investigation into clock drift as follows:
*Connect two MicaZ nodes via MIB510s to a laptop's serial ports (am getting a
twin serial port adapter)
*Node A transmits its clock value to node B. Node B then logs it's clock value
when the message arrived
*Node B then sends the value of the two clocks (A,B) over the serial port to
the laptop
*They swap roles and repeat.
*The incoming data will be timestamped by the laptop and used to look at
potential synchronisation techniques/evaluation.
I'm not sure about the issue of timestamping and what variable latency will be
introduced by the radio. Can people give me some hints and recommendations for
this, as well as any suggestions to improve my plan?
Does anyone know of applications already available that I can draw from?
Thanks and regards,
Mike
-------------------------------------------------------------------
This e-mail and any attachments may contain confidential and/or
privileged material; it is for the intended addressee(s) only.
If you are not a named addressee, you must not use, retain or
disclose such information.
NPL Management Ltd cannot guarantee that the e-mail or any
attachments are free from viruses.
NPL Management Ltd. Registered in England and Wales. No: 2937881
Registered Office: Serco House, 16 Bartley Wood Business Park,
Hook, Hampshire, United Kingdom RG27 9UY
-------------------------------------------------------------------
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
