You should lookup the specs on the standard sensors to see if they have any useful IR range. If so maybe a filter would do the trick for you. Otherwise you'll need to find a photo-diode that is good in the IR that you want and replace one of the standard sensors -- or add it to the expansion connector on a different ADC input. I noticed that the startup-kit that I got from Moteiv had only one board that was fully populated, if the same is true with telosb's then it's much easier to NOT have to remove those tiny parts...
MS Giovanni Rossi wrote:
hello all I must mesure the iir light intensitive with my telosb, but there is a problem. The telosb has two sensor ligth only, TSR (total solar radiation) and PAR (photosynth-active radiation), but I would tha IR (infra red). There is a mode to mesure this radiation conjoining properly TSR and PAR? thanks sorry my english _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
