People have successfully used TestNetwork application in multihop environments.
Did you try to run the TestNetwork application? If you did, you should send all the packets that you receive at the root and the individual nodes. We can use that debug information to help you describe what might be wrong. - om_p > Thank you very much for your help. But when I am trying the Demo > program in the tutorial in Lesson12 in TinyOS's > website(http://www.tinyos.net/tinyos-2.x/doc/html/tutorial/lesson12.html), > It still can not work(just works fine for the one hop sensor too). I > really do not know the reason. > liang > > 2007/11/13, Omprakash Gnawali <[EMAIL PROTECTED]>: > > > > Are you trying this on a simulator? If so, I would check the > > topology. If you are trying on the motes, which motes? I would also > > run the TestNetwork application which makes all the motes periodically > > send a message to the root. Even if you encounter the same problem, > > this application will make the motes send debug messages over the > > UART. Using these debug messages, you can usually get a detailed > > explanation for why it might not be working. > > > > - om_p > > > > > > > > Dear all, > > > Sorry to disturb you, I have some problems with using the > > > Collection to send the multihop message, I want to using it to send > > > the report message multi hops. But when I am using the > > > CollectionSenderC(AM_REPORTMSG) as the send for sensor to send the > > > message, and the CollectorC.Receive[AM_REPORTMSG] as the Receiver for > > > the root to receive message, I can only receive messages from just one > > > hop sensors. Root can receive message from sensors which are out of > > > one hop range. I have tried it many ways, but still can not make it > > > work. > > > So I wonder if any one can help me with this problem, I really > > > appreciate if someone can help. > > > Best regards, > > > liang > > > > > _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
