Sorry, can't help you there, but the TinyOS source code should provide enough examples of controlling external devices. Maybe someone else on the list can point you to a good example, I'll this to tinyos-help.
Michiel From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: dinsdag 20 november 2007 15:24 To: Michiel Konstapel Subject: Re: RE: RE: [Tinyos-help] Send data to ADC Channel thank you Michiel i use TinyOS 1.1, but I need to control a small motor that use 3V using the micaZ mote, I think to connect it using the I/O pins(PW0-7 and INT-03 ), but I don't know how to code it, do you have any idea that could help me pleas ashraf ----- Original Message ----- From: Michiel Konstapel Date: Tuesday, November 20, 2007 5:10 pm Subject: RE: RE: [Tinyos-help] Send data to ADC Channel > If you use TinyOS 2, > > http://www.tinyos.net/tinyos-2.x/doc/html/tep117.html: Low-Level > I/O should > be a good place to start. For TinyOS 1.x, look at how things > like LedsC are > implemented. > > c > > > > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] > Sent: dinsdag 20 november 2007 14:42 > To: Michiel Konstapel > Subject: Re: RE: [Tinyos-help] Send data to ADC Channel > > > > Dear Michiel, > i face the same issue, i need to use the I/O pins but i > dont know how, > i have Micaz mote and i could not fined documents to help me to > code and use > the I/O pins??? > thank you in advance ... > >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
