Hi,
I have a question regarding the oscilloscope application in lesson 6 of TinyOs
1.x tutorial. the application states that the maximum Payload size of a TinyOS
frame is 29 bytes however it doesn't put any limitation regarding the serial
data forwarder. does this mean that the maximum data rate achieved by the
serial forwarder is equal to the UART chosen baud rate. and if each packet has
about 34 Bytes as explained in detail down then the serial forwarder can
achieve a data rate of about 200 packets per second?
Does anyone know why the payload size was limited to 29 bytes only? can it be
increased?
The high data rate is necessary for me since i am having a high data rate
application and would like to achieve a reasonable packets per size which are
not supported by the Xserve application of Moteworks which limits the packets
to 5 packets per second making it unsuitable for my application.
anybody has ideas?
Regards,
Nashwa
---------------------------------
Be a better pen pal. Text or chat with friends inside Yahoo! Mail. See how._______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
