First try using [EMAIL PROTECTED]:telosb or "tmote" since I think 19.2 is the wrong baud rate and the platform name may also select some message parsing "features". But I would expect to see some garbage from Listen even with the wrong settings.
I believe Oscope blinks an LED when it transmits. Do you see any action on the mote? If you have access to the Boomerang code from ex-Moteiv, there is a set of Count demos, one being CountUart which eliminates a lot of excess baggage when testing. I don't think there is an equivalent in the regular apps. The SENSORBOARD thing is specific to micaX's so you can safely do nothing when using telos's. Oscope and other demos use platform/msp430/DemoSensorC.nc which is connected to ADC port 10 (INTERNAL_TEMPERATURE), which provides almost no interesting data, but at least does something... And, no, neither you nor most anybody else needs SerialForwarder. The Port Busy message usually means that some other program has that port open. You may still have a Listen running or something. With the MOTECOM setting as shown above, Listen should connect directly to the right USB port, on Windows anyway (assuming that motelist shows that COMx for your device). I think there was some FTDI driver stuff that had to be installed to get to the USB. I did for tmotes anyway... Also...I hope you are looking at the help list in general because all my sends to yahoo's get bounced right away... MS Renee Azhen wrote: > dear all, > mine using is tinyos 1.x, I have uploaded the apps/Oscilloscope code > into to a telosb platform, and then use Command java > net.tinyos.tools.Listen to start the Listening program, but only > $ java net.tinyos.tools.Listen > [EMAIL PROTECTED]:19200 <mailto:[EMAIL PROTECTED]:19200>: resynchronising > no more info was outputted. > > when using "motelist", only COM9 was connectted to a node, so I set > export <mailto:[EMAIL PROTECTED]:192.> > <mailto:[EMAIL PROTECTED]:19200>[EMAIL PROTECTED]:192 > <mailto:[EMAIL PROTECTED]:19200>00 > > in the tutorial Lesson 6, there is word: > Remember to set the SENSORBOARD option in apps/Oscilloscope/Makefile > <file:///C:/Program%20Files/UCB/cygwin/opt/tinyos-1.x/apps/Oscilloscope/Makefile> > > to either micasb or basicsb depending on the type of sensor board you have. > my sensor node is a telosb node, I don't know whether it is because is > neither micasb either basicsb, there was no output message. > > Could you help me? I will really be thanksful for your help > thanks > Sam > > ------------------------------------------------------------------------ > 天生购物狂，狂抢购物券，你还等什么！ > <http://cn.mail.yahoo.com/promo/taobao20/index.php?souce=mail_mailletter_tagline> > > > > > ------------------------------------------------------------------------ > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help -- Platform: WinXP/Cygwin TinyOS version: 1.x, Boomerang Programmer: MIB510 Device(s): Mica2, MicaZ, Tmote Sensor board: homebrew _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
