Hi Abdullah,
This is possible, but there are some limitations to consider: 1) xserve will log the packets from both applications to the database with no issues (all the data will be captured) 2) MoteView can only display one type of sensorboard at a time - you will need to switch database tables to view the data relevant to you. 3) XMesh will only be able to forward packets that are smaller than the maximum packet size of the firmware. You will need to verify that XMDA300 and XMTS400 have similar packet sizes. We can provide you 2.0.G firmware that allocates larger buffers to allow forwarding of any sensor packet over the network without issue. Martin __________________________________________________ Martin Turon | Crossbow Technology, Inc. ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Abdullah Kadri Sent: Friday, January 04, 2008 7:19 AM To: [email protected] Subject: [Tinyos-help] MoteView Hello, Can we show two different motes programmed with two different applications (i.e. XMDA300 and XMTS400) on MoteView at the same time? Thanks, Abdullah Kadri, P.Eng., Ph.D. Candidate The University of Western Ontario Department of Electrical and Computer Engineering Phone: (519) 661-2111 ext. 81271
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
