Hello Asier,
The OEM module programmer is nothing but a packaged of MIB510
programming board with socket interface for the OEM module. It should
connect to your PC via serial COM port (typically COM1). So, your
programming command should be something like
make <platform> install,<n> mib510,com<X>
I hope that helps,
Giri
________________________________
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Asier
Arruti
Sent: Wednesday, January 30, 2008 4:13 AM
To: [email protected]
Subject: [Tinyos-help] MicaZ OEM module programmer
Hi again,
We are trying to load MICAz OEM with a programme that we had previously
tested (The programmer is shown in the picture). However, we have found
no reference of how to configure the MakeXbowlocal file, and the
documents we have found only mention how to build new boards; so, how
can we use this module programmer?
Thanks in advance,
Asier
________________________________
Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try
it now.
<http://us.rd.yahoo.com/evt=51733/*http://mobile.yahoo.com/;_ylt=Ahu06i6
2sR8HDtDypao8Wcj9tAcJ>
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
