The port 10001 of MIB600 is used to program the Mote and port 10002 is used to read data from the base Mote. You need to set the MOTECOM variable to port 10002 of your MIB600 for the PC tools to read data. Regards, Giri
________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Giovanni Abu-Aita Sent: Monday, February 11, 2008 9:29 PM To: [email protected] Subject: [Tinyos-help] net.tinyos.tools.Listen MIB600 No data is seen on theDisplay hello everybody, I am running the Oscilloscope Application on the mote that is connected to MIB600. I am trying to read the packets and display them on the screen using net.tinyos.tools.Listen but nothing seems to appear on the screen. with MIB510 everything goes fine. with MIB600 I set the value of MOTECOM: export MOTECOM:[EMAIL PROTECTED]:10001 but still the Listen gives me: [EMAIL PROTECTED]:10001: resynchronising........ and stops there. anybody can help in this. P.S. : 1) I had this problem before and I have changed the settings of the MIB600 by browsing it: I set the Speed of channel 1 to 115200 and the speed of channel 2 57600 and i made sure the ports are 10001 and 10002 respectively. Fortunately It worked. But now I don;t know what I did wrong; I even restored to factory settings plus the changes above but it did;t work. 2) I also tried the SerialForwarder but it seemed it doesn't read the packets. Any help??? Thanks in advance ________________________________ Never miss a thing. Make Yahoo your homepage. <http://us.rd.yahoo.com/evt=51438/*http://www.yahoo.com/r/hs>
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
