Hi Soumya, The problem is likely caused by the USB to Serial adapter... not all USB-Serial adapters work reliably with different OS and PC makes. We have seen cases with certain adapters where you can program the Mote, but can't read data back. What is the make and model of your adapter? I would suggest trying either direct PC serial connection or using a MIB520 USB programming board. Regards, Giri
________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Soumya Jain Sent: Wednesday, February 13, 2008 12:32 PM To: [email protected] Subject: [Tinyos-help] problem with xserve Hello, I am just starting to learn TinyOS, and am using Crossbow's Moteworks 2.0. I have been able to succesfully load blink, and am trying to run a simple light sensing application. The application has loaded correctly, because I have configured three LEDs to indicate - Firing of timer Sampling of light Sending of data back And all three are blinking correctly. However, when I use xerve in my cygwin, it gets stuck at "Opening serial device /dev / ttyS3 @ 57600". I know that the port is COM4, as shown in the Device Manager. I am using a USB to DB9 converted, with a mib510 board, and mica2 mote. I request you to solve my problem. Thanks, Regards, Soumya Jain EE Graduate Student Penn State University koi to chal zidd fariye... ________________________________ Shed those extra pounds with MSN and The Biggest Loser! Learn more. <http://biggestloser.msn.com/>
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
