That works fine (for me). I have a 3.3v supply connected to pins 1&9
and I can use either that supply or the USB to power the tmote.
It doesn't seem to matter if both are connected at the same time.
MS
Jose Araujo wrote:
Dear all,
I wanted to have na external vcc to supply my tmote sky but the tmote
datasheet is not conclusive about it. Does anyone implemented already? I
was thinking about connecting the 3V supply to the pin 1 and 9 of the
external 16 pin connector i.e. AVCC and Gnd, with a L from ExternalVCC
to AVCC, as its seen in the battery supply schematic (Vccin with C1, L2
and C2 turned into DVCC)
Thanks to all,
José
------------------------------------------------------------------------
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
--
Platform: WinXP/Cygwin
TinyOS version: 1.x, Boomerang
Programmer: MIB510
Device(s): Mica2, MicaZ, Tmote
Sensor board: homebrew
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
