"There is no response from the base station" means the MoteConfig has not been able to receive heartbeat messages from the base station. Several questions: 1. Which MIB board are you using and what COM port is assigned to it? 2. Are you using any USB-Serial adapter? 3. Which application did you program into the base station Mote? (one that is attached to the MIB board)? 4. Before attempting to OTAP, were you able to receive/view data in MoteView from the remote Motes and verify communication? Regards, Giri
________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Asier Arruti Sent: Wednesday, February 27, 2008 8:03 AM To: [email protected] Subject: [Tinyos-help] Over-the-Air-Programming Hi, I am trying to programme the MicaZ motes over-the-air, because OEM Edition must be soldered to use it (and it is always difficult to get things working as desired the first time). I have followed all the steps that are explained in "MoteConfig User's Manual" document (http://www.xbow.com/support/support_pdf_files/moteconfig_users_manual.p df), but my base station does not detect the turned-on motes (paragraph 5.2, page 16). The message it shows is "There is no response from the base station. Please check your connections, verify that switch SW2 is set to the OFF position and click Search again". I have checked that switch, the COM ports (they seem to be working fine because I can programme the Motes normally) but I get the same message over and over again. Possibly, I am doing something dumb, so could anybody help me solve this problem? Thanks in advance, Asier Arruti ________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. <http://us.rd.yahoo.com/evt=51733/*http://mobile.yahoo.com/;_ylt=Ahu06i6 2sR8HDtDypao8Wcj9tAcJ>
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
