Is it SerialForwarder that prints the "fail" message or the client that you use to send the message to SF?
If it's the client, perhaps you have the wrong MOTECOM setting. You can also eliminate SF and go directly from client to USB using the "serial@/dev/ttyUSB0:115200" MOTECOM setting. And try "tmote" instead of the baud rate. MS CHEUNG SAM wrote: > Hi, > > I set the (CC2420) channel to 14 to tmotesky sensor and the > basestation. When I run the application and serialforwarder, there is a > problem. When I try to send a packet to the other sensors, > serialforwarder give me a message "write fail". But it can still receive > the packet from other sensors. > > The setting of serialforwarder is serial@/dev/ttyUSB0:115200 > The baul rate is 115200. > > Can anyone help me to solve this problem? thank you very much. > > ------------------------------------------------------------------------ > Yahoo! 網上安全攻略，教你如何防範黑客! *了解更多* > <http://hk.promo.yahoo.com/security/index.html> > > > ------------------------------------------------------------------------ > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help -- Platform: WinXP/Cygwin TinyOS version: 1.x, Boomerang Programmer: MIB510 Device(s): Mica2, MicaZ, Tmote Sensor board: homebrew _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
