I'd be a little suspicious of the constant 4095 reading since that's
the max value for the ADC. You might try switching the mote sensor
to some other ADC channel, is there a temp or light sensor on the thing
that you could use?
MS
Ittipong Khemapech wrote:
All,
I have been running Oscilloscope application (with no modification) on
Tmote Invent. Also installed and ran BaseStation on Tmote Sky.
After running SerialForwarder, I have a constant reading of (about) 4095
or 4096.
According to the DemoSensorC.nc, the actual voltage is obtained by
dividing the reading (ADC counts) by 4096 and multiplying by 3.
So, I have 3 V.
I have some questions:
1. Is it normal to have that 4095 (or 4096) all the time?
2. As Invent is not supported by TinyOS 2.x, is voltage the only reading
I can get?
Many thanks in advance,
Ittipong
Platforms - Tmote Sky and Invent
OS - TnyOS 2.x
Window XP & cygwin
------------------------------------------------------------------------
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
--
Platform: WinXP/Cygwin
TinyOS version: 1.x, Boomerang
Programmer: MIB510
Device(s): Mica2, MicaZ, Tmote
Sensor board: homebrew
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
