Hi Alessio,
In general, I have bad experience with opening serial ports that have high
numbers under Cygwin. Try something for me. Download FTClean.zip from FTDI
website, and this is going to reset the virtual COM numbering. Now, if you
plug your mote in, it should be COM3 which should work fine.
Mike
On Fri, 14 Mar 2008, [EMAIL PROTECTED] wrote:
Hi Weiping,
I installed the last version of Deluge T2 and I followed your suggestions but
nothing different is happened. I tryed injetting different values, but the
result is the same.
Maybe i am putting the wrong reference to the serial port..But doing motelist I
obtain:
Reference: M4AN6DFK
CommPort: COM27
Description: USB Device
What do you think about that?
Thanks,
Alessio
________________________________
Da: weiping SONG [mailto:[EMAIL PROTECTED]
Inviato: ven 14/03/2008 14.46
A: [EMAIL PROTECTED]
Oggetto: Re: [Tinyos-help] Deluge T2: Unable to initialize serial port
[EMAIL PROTECTED] wrote:
Hi Razvan,
I am trying to install Deluge T2 (Blink application) on a windows
based machine and I am having some problems. The mote that I am using
is connected to COM27 port and when I type ./burn COM27 telosb it
doesn't work because of it is impossible to open that port. So I tryed
to type ./burn 26 telosb and in this case something different
happened. The used port could be opened and the first part of the
application was compiled. When the burn application try to upload the
image executing ${TOS_DELUGE} ${PORT} ${PLATFORM} -i 0
build/${PLATFORM}/tos_image.xml, a new error appear.
ERROR: Unable to initialize serial port connection to 26.
The same error is printed also when the application try to reboot the
base station doing ${TOS_DELUGE} ${PORT} ${PLATFORM} -b 0 .
Could you suggest me something?
Thanks in advance,
regards,
Alessio Barbirato.
------------------------------------------------------------------------
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
Hi Alessio,
Which version of Deluge T2 are you using? You might get the lastest
version of Deluge T2 from this git repository:
http://hinrg.cs.jhu.edu/git/deluge/tinyos-2.x.git
http://hinrg.cs.jhu.edu/git/?p=deluge/tinyos-2.x.git (gitweb)
And you could not inject an image to slot 0, so try to inject 1,2 or 3
(... -i 1...)
I hope this information will to helpful to you.
Weiping Song
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
