Few things to check/try: - Make sure the programming port on MIB520 is in fact COM3 (lower of the 2 COM ports) - Make sure that the Mote is seated firmly into the 51-pin connector of the MIB520 - Make sure that no other application is using COM3. - Try "make micaz install mib520,/dev/ttyS2" or "make micaz install mib510,/dev/ttyS2" instead. Good luck, Giri
________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of ilpadrino corleone Sent: Monday, March 17, 2008 10:05 AM To: [email protected] Subject: [Tinyos-help] writing problem with micaz Hello, I have installed the crossbow software (cygwin, moteconfig, moteview, ...) on windows xp. When I try to install MyApp (tutorials/lesson1) into the mote I will get it compiled but it won't upload. make micaz install mib520,com3 {........} uisp -dprog=mib520 -dserial=com3 --wr_fuse_h=0xd9 -dpart=ATmega128 --wr_fuse_e=ff --erase --upload if=build/micaz/main.srec.out and after that line cygwin will stay silent. I also tried to program it with MoteConfig without any results. I have micaz motes, with a mib520 board and msp400. If anyone could give me a hint of what's going on I'd be grateful. Thanks in advance, David ________________________________ Todo ruedas: información práctica y todo el glamour del mundo del motor. MSN Estilo y Tendencias <http://estilo.es.msn.com/>
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
