Well the link you sent was the right one, but for some reason in your output that you sent it shows taht you ahd set nesc-separator to neverWrite156 (or something like that) in the avr.rules file , and that was a remnant of the old makefile in cvs. Do you somehow ranodmly have some cached version or something?
Kevin On Fri, Mar 21, 2008 at 10:21 PM, ST <[EMAIL PROTECTED]> wrote: > Kevin, > I just followed then today. The only thing I did differently was I did not > follow this particular instruction: > While doing this: Installing the tinyos-2.x toolset, I did not do this: > NOTE: For Leapord users, you will have to open the configure.ac file and > remove the '-n' from line 109 > > Any chance you have pointer to the latest instructions? > > > > > On Fri, Mar 21, 2008 at 5:36 PM, Kevin Klues <[EMAIL PROTECTED]> wrote: > > When did you follow these instructions. It appears you may have > > followed an older version of them since the updated version doesn't > > have you replace the nesc-separator the same way. > > > > Kevin > > > > > > > > > > On Fri, Mar 21, 2008 at 5:22 PM, ST <[EMAIL PROTECTED]> wrote: > > > > > > I followed the following to get TinyOS on Intel-based Mac. > > > > http://docs.tinyos.net/index.php/Installing_tinyos-2.x_on_Mac_OS_X_%28Tiger_%26_Leopard%29 > > > > > > I did install both msp430-tools-i686 and avr-tools-i686. > > > > > > When I do make telosb, it succeeds with these messages: > > > make telosb > > > mkdir -p build/telosb > > > compiling BlinkAppC to a telosb binary > > > ncc -o build/telosb/main.exe -Os -O -mdisable-hwmul -Wall -Wshadow > > > -DDEF_TOS_AM_GROUP=0x7d -Wnesc-all -target=telosb > > > -fnesc-cfile=build/telosb/app.c -board= BlinkAppC.nc -lm > > > compiled BlinkAppC to build/telosb/main.exe > > > 2618 bytes in ROM > > > 55 bytes in RAM > > > msp430-objcopy --output-target=ihex build/telosb/main.exe > > > build/telosb/main.ihex > > > writing TOS image > > > > > > > > > However, for mica2 or micaz, I get the following error and any help on > this > > > would be great. > > > > > > make micaz > > > mkdir -p build/micaz > > > compiling BlinkAppC to a micaz binary > > > ncc -o build/micaz/main.exe -Os -finline-limit=100000 -Wall -Wshadow > > > -Wnesc-all -target=micaz -fnesc-cfile=build/micaz/app.c -board=micasb > > > -fnesc-separator=\never1096Writ > > > E -fnesc-dump=wiring -fnesc-dump='interfaces(!abstract())' > > > -fnesc-dump='referenced(interfacedefs, components)' > > > -fnesc-dumpfile=build/micaz/wiring-check.xml BlinkAppC.nc -lm > > > avr-gcc: error trying to exec 'cc1': execvp: No such file or directory > > > <commandline>: failed to preprocess > > > /opt/local/stow/nesc-1.2.9/lib/ncc/nesc_nx.h > > > avr-gcc: error trying to exec 'cc1': execvp: No such file or directory > > > <commandline>: failed to preprocess > > > /Users/sameer/tinyos-2.x/tos/system/tos.h > > > avr-gcc: error trying to exec 'cc1': execvp: No such file or directory > > > <commandline>: failed to preprocess > > > /Users/sameer/tinyos-2.x/tos/system/TinySchedulerC.nc > > > <commandline>: Scheduler `TinySchedulerC' has no scheduling interface > named > > > `TaskBasic' > > > avr-gcc: error trying to exec 'cc1': execvp: No such file or directory > > > <commandline>: failed to preprocess BlinkAppC.nc > > > _______________________________________________ > > > Tinyos-help mailing list > > > [email protected] > > > > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > > > > > > > > > > > -- > > ~Kevin > > > > -- ~Kevin _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
