Hi Arif, MoteView and MoteWorks do not support Cricket platform. Since Cricket has its own serial port, it doesn't need a MIB510 board to communicate with the PC. It can be plugged directly into a PC's serial port. MIB510 is typically used to re-program the Cricket. You can find more details at MIT's Cricket website below. http://nms.lcs.mit.edu/projects/cricket/
I hope that helps, Giri -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Monday, March 24, 2008 4:51 PM To: [email protected] Subject: [Tinyos-help] Cricket and MIB510 setup Hi everyone, I am working on WSN Cricket(MTS450) Platform and wanted to know how can Crickets(MTS450) communicate with the Serial Board(MIB510) which will act as gateway to collect/receive data from Cricket(MTS450) sensor nodes and report it to desired application. I read manauls on MoteWorks/Moteview and other documentation from Crossbow but i didnt find any specific solution to this problem and hoping that you can assist me about any solution to this problem, appreciate your reply soon. Arif _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
