Hi,
Thanks for your help. Now I'm trying to use the debug tool you provided, but
got a set of undeclared identifiers which I can't find. The undeclared
indentifiers are some registers such as UBRR0H,UBRR0L. What should I do now?
Sorry to trouble you again.
Best wishes!
Cui
在2008-03-30，"renjie huang" <[EMAIL PROTECTED]> 写道：
Hi
For TinyOS-1.x, if you want, you can use our debug tool. It is used to print
information to UART. See to attached files.
On 3/29/08, Cui Lin <[EMAIL PROTECTED]> wrote:
Thank you for your reply, it is really helpful.
I still want to know how can I make it in TinyOS 1.x?
Thanks again!
2008-03-30，"renjie huang" <[EMAIL PROTECTED]> ：
For TinyOS2, you can use printf in
:C:\tinyos\cygwin\opt\tinyos-2.x\tos\lib\printf
2008/3/29 Cui Lin <[EMAIL PROTECTED]>:
Can any one tell me how can I transmit a string from micaz to PC through a
serial port?
Thank you!
Cui
中 国 最 强 网 游 --- 网 易 梦 幻 西 游 ，166 万 玩 家 同 时 在 线
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
--
Renjie Huang
Sensorweb Research Laboratory
http://sensorweb.vancouver.wsu.edu/
Washington State University
中 国 最 强 网 游 --- 网 易 梦 幻 西 游 ，166 万 玩 家 同 时 在 线
--
Renjie Huang
Sensorweb Research Laboratory
http://sensorweb.vancouver.wsu.edu/
Washington State University_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
